Moulinex HV 4 ME41513E User Manual download pdf (Page 6)

- Any intervention other than normal cleaning and maintenance by the customer must be carried out by a Moulinex

approved service centre.

- If the cord is damaged, do not use the appliance. In order to avoid any risk, have the cord replaced by an approved

Moulinex service centre (see the list in the service booklet).

- Do not place the appliance, the supply cord or the plug in water or any other liquid.

- Do not leave the supply cord within reach of children.

- The supply cord should never be near to or in contact with hot surfaces, near to a heat source or sharp edges.

- Do not leave the appliance unattended whilst in operation.

- For your own safety, only use the Moulinex accessories and spare parts suitable for your appliance.

- For your safety, this appliance complies with applicable standards and laws:

Low Voltage Directive

Electromagnetic Compatibility

Environment

Materials in contact with foodstuffs.

- Do not use your appliance for more than 14 minutes.

Wash all accessories in soapy water. Rinse, and carefully dry them straight away.

The screen and the cutter must remain greased. Coat them with oil.

Do not use your product when empty if the screens are not greased.

ATTENTION: The blades of the cones are extremely sharp; handle the cones with precaution, always holding them

by the plastic parts.

MINCER HEAD (A):

Assembling the mincer head (diagrams 1.1 and 1.2)

Hold the body A1 by the feed tube, with the wider opening uppermost. Insert the feed screw A2 (long shaft first) into

the body A1.

Fit the stainless steel cutter A3 on the short shaft that protrudes from the feed screw A2 with the cutting edges facing

outwards. Fit the screen of your choice on the cutter A3, locating the two lugs in the corresponding two notches in

the body A1.

Screw tight (without locking) the nut A5.

Fitting the mincer head to the appliance (diagram 2):

Facing the unplugged motor unit E, insert the mincer head with the feed tube inclined to the right.

Line up the two pins of the mincer head with the two notches of the motor unit.

Push the mincer head home into the motor unit E and then turn the feed tube to the left until it comes to a stop (the

feed tube should now be vertical).

Engage the removable tray B with the lugs on the mincer head feed tube.

Plug the appliance in; it is ready to use.

Use:

Prepare the entire quantity of foodstuffs to be minced, removing bones and gristle. Cut the meat into pieces (approxi-

mately 2 cm x 2 cm).

Place a bowl beneath the mincer head.

Press position “1” of button D to start the appliance, place the pieces of meat on the tray and slide them one by one

into the feed tube with the help of the pusher C.

Never push in the feed tube with the fingers or any other implement.

Tip:

At the end of the operation, you can feed a few pieces of bread into the feed tube to clear any meat remaining in the

machine.

KEBBE ATTACHMENT

Fitting (diagram 3):

Insert the feed screw A2 into the body A1 of the mincer head. Fit the kebbe making head F1, locating the lugs in the

USING YOUR APPLIANCE FOR THE FIRST TIME:

BEFORE FIRST USE

Notice_2643049A:Mise en page 1 29/10/10 16:23 Page2

1 2 3 4 5 6 7 8 9 10 11 ... 133 134

Comments to this Manuals

No comments

Moulinex HV 4 ME41513E User Manual Page 6

Comments to this Manuals

Related products and manuals for Meat grinder Moulinex HV 4 ME41513E